… In this paper, metallization of bacteria cells is demonstrated by … colloid palladium-tin catalyst
on the surfaces of Citeromyces matritensis and Bacillus cereus. The activated and metallized …

… for 1 h to produce a stable colloidal solution with a bluish-white … 5 mm thick) was added to
the colloidal sol and left for the … quent Pd solution treatment during the activation process. The …

… A simpler way for palladium chemisorption is the one-step process where the substrate is
activated in the mixed PdCl 2 –SnCl 2 colloidal solution. Then, an acceleration step is …

… solutions [1, 2]. Due to the rising cost of palladium, the cost of surface activation during the
surface metallization … In order to decrease costs during surface metallization, activation without …

… ► The ABS surfaces were etched by H 2 SO 4 –MnO 2 colloid. ► With absorption and a …
metallization process. To reduce the cost in the surface metallization, Pd free surface activation …

… we first took the 0.5 mL Pd/Sn colloid solution. The colloid particles tended to agglomerate
and finally precipitate. After filtration and rinse, the colloid became a paste-like pellet and was …

… DNA is significantly enhanced after the metallized DNA 1 is “activated” by cysteine, we then
… aqueous solution under vigorous stirring.after mixture, the resulting colloidal silver solution …

… These films are used for galvanic metallization of insulating surfaces, and the coatings have
… In this work, the activation of dielectric surface by the colloidal solution of cobalt compounds …

… Palladium colloid activator which is employed in LISA technique [8] is very surface-active …
using this solution is impossible to achieve. In the case of activation with palladium colloid, over…

… activated in the colloidal Sn/Pd solution for 5 min at 40 C and then put into the accelerating
solution … , one-step activation by colloidal Sn/Pd was used to activate the TaN substrates …