ADVANTAGES AND DISADVANTAGES OF LIGHTWEIGHT STEEL THIN-WALLED STRUCTURES
DOI:
https://doi.org/10.30888/2663-5712.2024-25-00-065Keywords:
lightweight steel thin-walled structures, lightweight metal structures, metal intensity.Abstract
The article discusses the advantages and disadvantages of lightweight steel thin-walled structures (LSTS), which are becoming increasingly popular in modern construction. The article analyses the main characteristics of lightweight steel structures, suchMetrics
References
1. Schafer, B.W. and Peköz, T. Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses // Journal of Constructional Steel Research, 47(3), 1998. pp.193-210
Weng, C.C., Peköz, T., Teoman. Residual stresses in cold-formed steel members // Journal of structural engineering New York, N.Y., 116 (6), 1990, pp
Hancock, G.J. Cold-formed steel structures // Journal of Constructional Steel Research, Volume 59, Issue 4, April 2003. pp. 473-487.
Kwon, Y. B. and Hancock, G. J. Tests of cold-formed channel with local and distortional buckling // Journal of structural engineering, 118(7), 1992. pp. 1786-1803.
Lau, S.C.W., Hancock, G. J. Distortional buckling formulas for channel columns // Journal of structural engineering, New York, N.Y., 113 (5), 1987, pp. 1063- 1078.
Schafer, B.W. Cold-formed steel behavior and design: analytical and numerical modeling of elements and members with longitudinal stiffeners, PhD dissertation, Cornell Univ., Ithaca, N.Y., 1997.
Papangelis, J.P., Hancock, G.J. Computer analysis of thin-walled structural members // Computers and Structures, №56 (1), 1995, pp. 157-176.
Ungermann D., Lübke S., Brune B. Tests and design approach for plain chnels in local and coupled local-flexural buckling based on Eurocode 3 // Thin-Walled Structures. 2014. Vol. 81. Pp. 108–120.
Moen C.D., Schafer B.W. Experiments on cold-formed steel columns with holes // Thin-Walled Structures. 2008. No.46. Pp. 1164–1182.
Tarigopula V., Langseth M., Hopperstad O.S., Clausen A.H. Axial crushing of thin-walled high-strength steel sections // International Journal of Impact Engineering. 2006. No.32. Pp. 847–882.
M. Mohammadreza and Sanjay R. A. Improving buckling response of the square steel tube by using steel foam, 2014.
БАРАН, Денис Ярославович; ГУДЬ, Михайло Іванович; ШУМЕЙКО, В. Вплив високих температур на ударну в’язкість сталі 25Х1М1Ф. Праці конференції Міжнародної науково-технічної конференції присвяченої 70-річчю від дня народженнячлен-кореспондента НАН України, проф. Яснія Петра Володимировича „Міцність і довговічність сучасних матеріалів та конструкцій “, 2022, 89-90.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
